[Home] [Catalogue Index] |
||||||||||||||||||||
Cling Mount System |
||||||||||||||||||||
Overview : The Cling Mount System is a temporary mounting system. Rubber stamps are attached to EZ-Mount cling cushion, trimmed, then placed on a clear acrylic block for stamping. After use the stamp is cleaned and placed on 3-ring Acrylic Storage sheets for easy storage.Advantages
Materials needed:
Directions : |
 |
1. Peel the backing off the adhesive side of the EZ-Mount cushion, and stick the rubber die on it. |
 |
2. Use a pair of scissors and/or a razorblade knife to trim
the rubber around the printing area of the stamp die. Cut straight down through the cushion. Avoid "under-cutting" the rubber die by angling your cut under the stamping die. |
 |
3. Peel the paper backing off, and press the die on an acrylic block; your stamp is ready to use! |
 |
When you stamp, you can look right through the
block to see exactly where your images is going to be positioned on the paper. To remove the die from the block, you just peel it off. You clean your stamp like any other stamp. |
 |
Store your stamps on our acrylic storage sheets in a notebook. You can put a paper page behind each
clear acrylic page in
your storage notebook. Stamp the image on the paper to keep your dies organized. (Hint: If your die is not sticking, it is losing its static cling. Clean with a bit of window cleaner, and rub it vigorously on a piece of clothing to ‘re-charge’ the static cling) |
Cling Mount System Users: Please note, we have changed our original Cling Mount System.
We now to use EZ-Mount cushion. It is much easier, and
generally a superior way of doing it, and we recommend it to all
our customers. However, we have introduced thousands of stampers to
our original cling mount system, and so we will continue to stock the
double-backed adhesive and sheets of cling vinyl...but, I really recommend
you switch over to EZ-Mount as you use up your old
materials. - Dawne |
|
 Prices: (Canadian)
|
|
Got a question???
|
 |